Face milling and side milling

The AHLIMASTER series has received good chippings due to its unique cross-sectional shape. This makes high speed and efficient processing possible.

The commutative head end milling cutter is used to process aluminum alloy to prevent welding due to high dip Angle and mirror treatment to improve efficiency.

  1. Side milling, coarse pocket milling

When using low-stiffness tools, cutting edge cutting and abnormal damage can occur when processing titanium alloy. High hardness tools and low cutting resistance are recommended. Stable processing is possible because the VHFX series has a high rigidity design, and the cutting resistance is lower because of the cutting edge of the convex curve and the v-shaped formation of the clamping surface.

  1. Face milling and side milling

In the process of high speed machining, different cutting resistance is produced in the processing of titanium alloy due to the different cutting resistance.

The newly developed MP9130 level combines with the excellent wea

  1. Face milling and side milling

In the process of high speed machining, different cutting resistance is produced in the processing of titanium alloy due to the different cutting resistance.

The new developed MHP9130 is equipped with excellent abrasion resistance, due to the high – layer and low – cutting resistance of the JL circuit breaker, so that it has a stable high speed roughness.

  1. drilling

Drilling on the hardened stainless steel of 15-5ph precipitation.

Because 15-5ph of high strength is usually used for aircraft parts, abnormal damage such as cutting and breakage on cutting edges can easily occur. Because of excellent coating technology and optimized tool geometry, the MHMS drilling series has stable processing performance.

  1. Rough pocket milling

Because 15-5ph of high strength is usually used for aircraft parts, abnormal damage such as cutting and breakage on cutting edges can easily occur. The AHPX series has a good coating technology and optimized tool geometry, so that it has stable processing performance.